Temperature Thermocouple Sensor
Temperature Thermocouple Sensor
Ellab’s unique Temperature Thermocouple Sensor (TC Sensor) now allows users worldwide to use thermocouples in conjunction with wireless data loggers. The sensor has a temperature range of -50 to +62 °C. The Temperature Thermocouple Sensor is especially designed for applications that cause a lot of strain on sensors and require as little impact on samples as possible. A good example of said applications would be Lyophilization, also known as Freeze-drying.
The TrackSense Pro data logger series are equipped with an Interchangeable sensor option, unlocking several measuring parameters:
✓ Temperature
✓ Pressure
✓ Conductivity
✓ Relative humidity
✓ Vacuum
✓ Steam Penetration
The data loggers can easily be activated and read by the Multi reader station and combined with the Sky module for real time data via wireless communication.
Thermocouple Wire
The thin thermocouple wire itself has a temperature range of -196 to + 200 °C and is equipped with a “naked tip” that takes up next to no room within a sample and provides users with a faster response time. In addition to this, the wire comes in 10, 30, 50 and 100 cm lengths (30 cm standard), offering an additional layer of versatility. The data logger in combination with the mounted sensor has a temperature range of -50 to +62 °C and is calibrated from -60 to +60 °C with a state of the art accuracy of ±0.3 °C.
Increased Temperature Range
When keeping the data logger at ambient temperature, it is also possible to insert a wired sensor into other applications that require a wider temperature range. By using standard type T thermocouple sensors in various materials and lengths, the highly versatile Temperature Thermocouple Sensor can cover a temperature range of -50 to +400 °C.
Replace Thermocouple Sensors with Ease
The feature that makes this sensor highly unique, is the ability to have the thermocouple wire replaced via a screw terminal after a prolonged series of use. Typically, if wires get strained through rough handling or immensely demanding applications, the entire sensor head would have to be replaced – now with the Temperature Thermocouple Sensor, bundles of thermocouple wires can easily be acquired through Ellab and replace the single damaged wire, resulting in a far more cost-efficient process.
Features
– ideal for freeze drying applications that highly strain wires
– very thin thermocouple wire (AWG30) with low impact on product temperature
– unique interchangeable sensor option
– real-time data option with Sky module
– works in conjunction with the ValSuite® validation & calibration software
– FDA 21 CFR Part 11 compliant
– temperature range of -50 to +62 °C
– industry leading accuracy of ± 0.3 °C Calibrated
Sensor with this logger configuration: Temperature Thermocouple Sensor*
Temperature Measuring Range:
-50 to +62 °C (Calibrated from -60 to +60 °C)
-196 to +400 °C when keeping the logger at ambient and using appropriate thermocouple wire
Measuring principle: Thermoelectric Effect
Sensor element: Thermocouple Type T
Accuracy: ±0.3°C Calibrated
Position of Measuring Point from Tip: 0 mm
Cable Length: 10, 30, 50 or 100 cm
Cable Dimensions and Type: 0.55 x 0.95 mm type AWG30 with naked tip
Sensor Response Time:
T-63%: 0.03 Second
T-90%: 0.09 Second
Logger with this sensor configuration: Pro 3G
Operating Temperature: -50 to +62 °C
Operating Pressure: 0.001 mBar to 4 Bar ABS
House Material: 316L Stainless Steel
Diameter: 25 mm
Length: 44 mm
Weight with Battery: 48 Grams
Memory Capacity: 120,000 Data Points / 40,000 Samples
Minimum Sample Rate: 1 Second
Maximum Sample Rate: 24 Hours
Maximum Start Delay: 14 Days
Intrinsically Safe: Ex II1GD Ex ia IIC T3 Ga, -50 °C ≤ +105 °C
Time Accuracy: ± 5 Seconds Per 24 Hours
Battery: TSP Standard Battery